460 Ford Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1 (Edited)
Early production motorsport block without the extra head bolt provisions. Never hurt or sleeved, bore is 4.625 and has regular cam bearings. Clearanced for long stroke and o-ringed. All machine work done by Kasse. Fresh and ready to go. Asking 1600.00 and in north GA. 404-423-3730
 

·
Registered
Joined
·
6 Posts
Hey. I'm very interested in the block but how early production is it. And what combo did you run with it.


Thanks. Brian
 

·
Registered
Joined
·
4 Posts
Discussion Starter #4 (Edited)
I bought it from Rodger at Kasse race engines, it was a 632 N/a engine. They did all machining for a freshin up and the customer decided to get an aluminium block insted. It has been clearanced for 4.750 crank. You can call me at 404-423-3730 for more info . Thanks Tom. P.S. I will try to find a production date. I just know the early ones didnt have the xtra bolt holes. And it sonic tested nice because i was gonna use it in a heavy NOS app.
 
1 - 5 of 5 Posts
Top