460 Ford Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1,450 Posts
Discussion Starter #1
A 460 block 4.560 bore O ring in the block, so you can run lots of N20, turbo whatever.
4.5 crank forged SCAT, done by Adney Brown, short boss snout
BME aluminum rods, 426 forgings, 6.770 long, .990 pin, for 2.200 crank pin (chev)
Light weight Diamond Pistons, Flat tops for "A" heads, custom for this combo, bought from BF Evans.
Danny Bee belt drive.

Cam is negotiable, most people want their own cam profile but.. if you want a blower cam?

Short block is fully assembled. Machine and assembly work done by Dave Mclain
I have the specs on the bearings, rotating weight of crank/piston assembly ( very light )

Can possibly deliver if in the Mid west. Ohio/ Indy/Mich/Illinois/Kentucky

$4800.00

if you want the A heads that go with this combo ASK

call jerry
317 501 7395
 

·
Registered
Joined
·
1,450 Posts
Discussion Starter #3 (Edited)
1 - 3 of 3 Posts
Top