460 Ford Forum banner
1 - 4 of 4 Posts

· Premium Member
Joined
·
808 Posts
Discussion Starter · #1 ·
I have two 184 Tooth Aluminum Flywheels that are in good shape, and have just been on the shelf for a long time. They are setup for a 10.5" clutch.

Have 7/16th Crank Bolt holes....

Will sell each for $50.00 plus shipping.

If someone wants a complete clutch assembly, I can build one pretty quick...

Email or call me!
 

· Registered
Joined
·
106 Posts
I plan on putting a 460 in my 93 Mustang. I was thinking about putting a standard tranny behind it. Do you have any suggestions on how to get a 5 speed behind the 466 that would work with a factory style clutch?
Thanks,
Dale
BTW I am in NKC.
 

· Premium Member
Joined
·
808 Posts
Discussion Starter · #4 ·
I plan on putting a 460 in my 93 Mustang. I was thinking about putting a standard tranny behind it. Do you have any suggestions on how to get a 5 speed behind the 466 that would work with a factory style clutch?
Thanks,
Dale
BTW I am in NKC.
You can do it, but you will have to do some modifications on some things. As for a factory style clutch, that is no problem... I can build you a clutch to fit whatever need you have. You could use a duel disc diaphram clutch that would work with that. There are a lot of options! If you want to give me a call I will be in the K.C. area on Friday.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top