460 Ford Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
2,185 Posts
Still very worth it!

Banks calls these "tubular manifolds". They have a 5/8" thick flange that is vertically milled dead-flat after welding, and the instructions say to install them without a gasket since they're so flat. Really nice parts; well worth what you're asking. If I had a 460 based truck, I'd buy them.

B
 

·
Premium Member
Joined
·
3,225 Posts

·
Registered
Joined
·
87 Posts
I saw this post awhile back and I would be all over it if I knew I could make them fit. I am just unsure about buying something that may not fit. I will try giving Banks a call.
 

·
Registered
Joined
·
1 Posts
Headers?, Next in Line

I am in the process of pulling off left exhaust manifold because of a couple of busted studs. My 95 has the air Tube B/S + EGR connections. How is the left side header set up? Do they bolt to the Y pipe or do they need to be run back to the cat?

Sorry for so many questions, trying to search and surf threads to answer most of my questions.

Alan
 
1 - 15 of 15 Posts
Top