460 Ford Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
2,452 Posts
Discussion Starter #1
Taking these off my 521 and going with a moroso fabbed valve cover with billet looms and custom wires.

So my current trick flow fabricated valve covers are for sale. They have worked great and have no scratches or dents. I have drilled and installed summit billet baffles for fabricated valve covers and was using them, very little oil got past them. The baffles will accept all 1" breathers/PCV and have a double oring seal. I will also throw in my K&N breathers as well. They cleared my roller rockers and stud girdles using 2 pairs of stock felpro rubber gaskets.

the valve covers cost 250$ from summit http://www.summitracing.com/parts/TFS-53400804/

Baffles cost 26$ each from summit
http://www.summitracing.com/parts/SUM-440332/

K&N breathers cost 19$ each at summit
http://www.summitracing.com/parts/KNN-62-1170/

So totally i have 340$ in these valve covers and they only have 350 miles on them. I want to get 250$ for all this and that doesn't include shipping.

here is a pic of the valve covers on my car, I haven't taken them off yet until I get the ones to replace them tmrw. The K&N breathers are not in the pic but they are in great condition.
 

Attachments

1 - 7 of 7 Posts
Top