460 Ford Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter #1
BBF blue thunder Thor heads.... Heads are new CFE CNC ported.No hardware ,vales or rockers .This is for two bare heads with guides/seats with CNC ports. CFE said heads should go 530cfm on intake and 400 on exh which was recommended for 550 to 630 c.i or could be sent back for there big port which is 560/430 range for 630 C.i and up. I was going to put these on a boosted motor but plans have changed. Looking to get 5,500 OBO /TRADE. Located in se MI my cell is 734-634-1427 or email [email protected]
 
1 - 5 of 5 Posts
Top