460 Ford Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
163 Posts
Discussion Starter #1
Solid Roller cam.. 30 passes in a fast track mudtruck, and 10 passes in a drag car. I went to something with more lift, and more of a nitrous grind.

Intake Exhaust
Lift .692 .692

[email protected] 270 270

Centerline 108 108

Lobe seperation 108


Lift numbers are when being useb with 1.73 rockers

THis camshaft have an aggressive choppy idle, and is very responsive. Very fast revving, and makes instant power.


It is a Comp Cams grind.. I will update with a part number later. $150 plus shipping
 

·
Registered
Joined
·
5,676 Posts
Solid Roller cam.. 30 passes in a fast track mudtruck, and 10 passes in a drag car. I went to something with more lift, and more of a nitrous grind.

Intake Exhaust
Lift .692 .692

[email protected] 270 270

Centerline 108 108

Lobe seperation 108


Lift numbers are when being useb with 1.73 rockers

THis camshaft have an aggressive choppy idle, and is very responsive. Very fast revving, and makes instant power.


It is a Comp Cams grind.. I will update with a part number later. $150 plus shipping
Is this part # 34-720-9? My Comp book shows this as a "Puller, Mud Race, Roller Works best in 460 cu. in. or larger, 11:1 comp., tunnel ram. RPM: 3800-6500. Hot lash: .028"-.030". Grind # FF-306AR-8, 272*-272*@ .050" .692"-.692". 108* LSA"......PM sent
Rob
 
1 - 6 of 6 Posts
Top