460 Ford Forum banner

Blower crank hub

1697 Views 3 Replies 4 Participants Last post by  Frank Kramer

1 - 4 of 4 Posts
Who makes a crank hub for a Boss snout. I read on here BDS has one for a neutral balanced small block, but they claim they only have a counter balanced hub available.
Any info would be appreciated.
Use the NASCAR small block Ford dampner for a hub. It is available through FRPP.
crank hub

Hampton blowers probably has one, if not in stock, Don will usually make anything you need. He did some really great work for me, he's a nice guy to deal with. His # is: 562-803-9484
RCD makes them. Thats what we have been using. Later we made them by ourself...


1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.