460 Ford Forum banner

1 - 7 of 7 Posts

·
Premium Member
Joined
·
8,908 Posts
Discussion Starter #1 (Edited)
One pair of D3 castings on the shelf and available for immediate shipment.

Budget ported to 304 / 180 cfm at .600"/ .500" lift with particular attention paid to low and mid lift flow.
Decked to 92 cc chamber size
Stainless steel 2.08" / 1.65" one piece valves with 30 degree back cuts
Upgraded spring, retainer and lock package 110 / 280 open pressure. Single with damper
Bronze valve guide liners
Hard Seats on the exhaust side.
Guides topped and cut for viton metal clad P/C seals

Castings will be worth a minimum of 40 HP in a stock application and will easily support 1 hp per cubic inch with out a mondo cam. They are ready to bolt on and rock and roll.

Cost is $1,050.00 plus shipping.

Bolt on an easy 40 to 50 hp or more..


:D
 

·
Premium Member
Joined
·
8,908 Posts
Discussion Starter #2
Bump... These are the same castings that made 454 hp as posted on the tech pages...

Bump ttt


See this link for further information about the afforementioned build...



http://www.460ford.com/forum/showthread.php?t=153931

Castings are ported and currently in machining. They can be ready for delivery in a very short amount of time.





:D
 

·
Premium Member
Joined
·
8,908 Posts
Discussion Starter #3 (Edited)
Castings can be available this week...

6 Day bump...

Castings are available for immediate shipment.




:D
 

·
Premium Member
Joined
·
8,908 Posts
Discussion Starter #4
TTT

7 Day bump ttt...



:D
 

·
Premium Member
Joined
·
8,908 Posts
Discussion Starter #5
TTT

8 Day bump ttt


:D
 

·
Premium Member
Joined
·
8,908 Posts
Discussion Starter #6
TTT

8 Day bump ttt...


:D
 

·
Premium Member
Joined
·
8,908 Posts
Discussion Starter #7
TTT

7 Day bump ttt...


:D
 
1 - 7 of 7 Posts
Top