460 Ford Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #1
RHP budget ported early small chamber castings (1 pair only) available now.

Completely rebuilt with 3 angle performance valve job, chamber unshroud and radius. Decked .010". Castings have been cleaned, steel shot peened and checked for cracks.

Manganese bronze 1/2" guides"
Steel 2.08" intake valves and S/S 1.65" exhaust valves with 28 degree back cuts on both intake and exhaust.
3/8" guidle plates.
7/16" rocker studs BBC length.
Metal clad positive control viton valve guide seals.
Upgraded single spring package 110 seat 280 open with new retainers and 7 degree locks.

Castings flow 305/180 @ .600" lift and will easily support 450 to 500 hp with appropriate cam and compression ratio choices.

Castings are normally sold for $1,195.00 EXCHANGE.

This pair only is going to go for $1,295.00 OUTRIGHT no cores needed.

:D


S
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #2
Bump for visibility... and we will add an at cost remanned and curved duraspark

Flat rate shipping of $95.00



:D
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #3
Thought we had these sold but the buyer had to back out.

Still available.

Cam kit or distributor at cost as added incentive...



:D
 

·
Premium Member
Joined
·
8,753 Posts
Discussion Starter #4
"SOLD"

"SOLD"


:D
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top