460 Ford Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter #1
New C460 Motorsport intake that has the valley pan and water crossover milled off, sides still intact, $150 8- New JE pistons 4.628 bore, 1.360CH, .225 dome,.990 pin hole, .043-.043-3/16, gas ported, for C460 heads, no pins, $500. 8- New BRC pistons, 4.600 bore, 1.245CH, flattop, .990 pin hole, 1/16-1/16-3/16, for Blue Thunder or CJ style head, no pins, $400. A really nice pair of fully ported C9VE heads by Price Motorsport Engineering (PME), 2.25/1.75 stainless valves, set up for 550 lift hyd cam, $900. (2) new 1050 series Wilson Single Stage Pro-Flow Nitrous plates, part #302126. These plates are some really trick looking pieces. They are 1.25" thick with burst panels on two sides. The plates use Fan Spray tubes that cover 360 degrees and adjust from 150 to 350HP. I have a package of extra burst panels and a package of jets that goes with them. These units are nearly $400ea from Wilson, $500 plus shipping for everything or $300ea. Go to www.wilsonmanifolds.com if you want to check em out. E-mail-> [email protected] or phone at (901)268-6348 Thanks Jim
 
1 - 1 of 1 Posts
Top