460 Ford Forum banner

c6 shifter linkage position and pattern.

6315 Views 2 Replies 2 Participants Last post by  89lxcoupe
is the linkage strait down and pattern front to rear P-R-N-3-2-1 on all c6 transmissions ? mine is from a 76 lincoln long tailshaft that i converted to mid car shaft and housing !
1 - 3 of 3 Posts
33 views and no answer,I'll try;Every C-6 I've had rear-most position was 1st (looking at trans. from side and linkage poining down).So from right to left PRN321.HTH
33 views and no answer,I'll try;Every C-6 I've had rear-most position was 1st (looking at trans. from side and linkage poining down).So from right to left PRN321.HTH

thats the way mine is. just trying to make sure so when i get my shifter everything will be ok !
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top