460 Ford Forum banner

C6 vs FMX yoke

1156 Views 2 Replies 2 Participants Last post by  mudbogtom
Is a C6 yoke the same as one for a FMX? It appears that the splines are the same, as it slides in okay... just concerned about the seal matching up ok.
Thanks
Tom
1 - 3 of 3 Posts
The yoke in my C-6 was originally out of an FMX and no issues.
Thanks!
Tom
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top