460 Ford Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
397 Posts
Discussion Starter #1
I have a cam and lifters that came from a shortblock I bought. Too big for my build so it needs to go, I was told it was installed but never run. Looks good, no rust or issues.Grind# is Comp 34-343-4, 306/306 duration, .640/.640 lift.
$125
 

·
Registered
Joined
·
5,676 Posts
I have a cam and lifters that came from a shortblock I bought. Too big for my build so it needs to go, I was told it was installed but never run. Looks good, no rust or issues.Grind# is Comp 34-343-4, 306/306 duration, .640/.640 lift.
$125
Comp 34-343-4:
Solid Flat Tappet
Good for skiing. 1- 4 BBL in Jet boat with A impellor. RPM 3,000-6,800
Advertised duration: 306*-306*
@.050" 260*-260*
Gross Lift: .640"-.640"
LC: 110*
Valve Lash: .028"-.030"

Rob
 
1 - 5 of 5 Posts
Top