460 Ford Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter #1 (Edited)
I have a lot of good new and used parts for sale. We have switched motor programs a little and I have no use for these parts anymore.

-New in the box Icon forged flat top pistons, 4.440 bore, 3.850 stroke, 6.605 rod length, with a 1.040 wrist pin, for stock head layout. Part# IC636-080 $425.00

-New in the box Ford Motorsports 4.300 stroke cast crank, with 2.500 rod journals. It is designed to be ran with a 6.605 rod. I have set of pistons listed below that made it a 528 cubic inch. $250.00 sold

-Used CP 4.420 forged dome pistons with a 1.040 wrist pin. For stock valve layout. Will work with the crank listed. Used but skirts look good no damage. $250.00

-Used Wiseco 4.390 forged flat top pistons, 3.850 stroke, 6.605 rod length with 1.040 wrist pin. For stock valve layout. A little scuffing on the skirts but not bad. $150.00

-dooe-r iron CJ heads. They have been ported and I have flow sheets on the heads. They flowed 390cfm on the intake, and 220cfm on the exhaust @ .800 lifted. They are complete with 2.25 stainless intake valves, and 1.76 stainless exhaust valves, valve springs that are good to .800 lift, titanium retainers and 10 degree locks. Also included with these heads are new in the box Lunati Voodoo roller 1.73 rocker arms and stud girdles. I took these heads on trade, they came off of a running motor, and we have never had them apart, therefor sold as is. $1400.00

-Set of bare dove-a heads they have been cleaned and crack checked. $300.00

-Ford motor sports oil pump very little run time, nothing ran thru it, in great shape with shaft. $25.00

-Used comp roller lifters full set in good shape. $150.00

I have lots of small parts, private message me if you need some of the little stuff, I more than likely have. Buyer pays shipping on all parts from Ames, Ia.
 

·
Registered
Joined
·
2 Posts
Iron ci heads for sale

Hello; do you still have the heads for sale? Can you send pics to 817-705-7307, thanks, robert
 

·
Registered
Joined
·
1,979 Posts
Do you know the part number of the Wiseco's? Pictures? Trying to figure out compression ratio with a iron CJ head.

Thanks.
 

·
Registered
Joined
·
3 Posts
dooe-r

yes still interested in heads. let me no shipping costs and how you would like to be paid. shipping address 498 Fairveiw St Tamaqua Pa 18252. I sent a message yesterday, but Im not sure I did it right
 
1 - 11 of 11 Posts
Top