460 Ford Forum banner

41 - 51 of 51 Posts

·
Registered
Joined
·
508 Posts
DJ, this is a great list, this really helped me out, but I have one question, knowing what we now know of the bastard heads, why arent they up there with the Thor Or at leats the E heads?
 

·
Registered
Joined
·
707 Posts
FORD MOTOR SPORT B 460 HEADS

I HAVE A SET OF B460 MOTOR SPORT HEADS MILDLY PORTED

I HAVE SEEN IN DIFFERENT ADD'S THAT PEOPLE CLAMED TO HAVE THEM FLOWING OVER 500CFM AT 800 LIFT

1 GUY ON RACING JUNK SAID HE COULD NOT FIND A FLOW BENCH IN HIS CITY TO FLOW HIS B 460 HEADS AND HIS WAS NOT THE BASTERD HEADS
BUT AT .350 LIFT THEY FLOWED 550 CFM

I READ SOME WERE THAT THEY WERE A PORTERS HEADS
AND THAT A GOOD PORTER COULD MAKE THEM OUT FLOW A SET OF A460 HEADS BY 20% TO 30% IS THERE ANY TO THIS

I DID CALL TRICK FLOW AND THEY TOLD ME THE B460 HEAD IS A PORTERS HEAD
AND THAT IN THE HANDS OF THE RIGHT PORTER THEY WOULD OUT FLOW ANY OF THE A460 HEADS

THEY SAID IT WAS MADE FOR NHRA PRO STOCK RACER'S
MAINLY BOB GLITON
SORRY ABOUT MY SPELLING I HAVE DISLEXIA
BUT I AM GETTING BETTER

I HAVE HAD A LOT OF PEOPLE ON HERE CALL ME AND TRY TO BUY THEM
AND TELL ME THAT THEY WERE NOT A VERY GOOD HEAD

BUT THEN WHY DO THEY ALL WANT TO BUY THEM ???

I WANT TO RUN AN A460 TRICK FLOW TUNNAL RAM

SO I WOULD HAVE TO AT LEAST OPEN THE INTAKE PORTS UP TO THE A460 SIZE AND MATCH PORT BOTH THE HEADS AND INTAKE TO EACH OTHER

I HAVE NEVER HAD A BBF BEFORE I HAVE ALL WAYS RAN A SBF
I DONT KNOW MUCH ABOUT MY HEADS EXCEPT
THE GUY I BOUGHT MY CAR FROM EATHER
DID NOT KNOW ANYTHING ABOUT MY MOTOR
OR
JUST LIED TO ME

OR

BOTH

COULD SOME ONE PLEASE TELL ME WHAT KIND OF FLOW NO;S I CAN GET OUT OF THESE HEADS

WHEN I PUT THIS MOTOR BACK TOGETHER IT WILL BE A 557
AND I REALLY DONT RACE THAT MUCH
I LIKE GOING OUT ON TEST AND TUNE NIGHT
AND JUST GOING AS FAST AS I CAN

WHEN I DID RACE I RAN HEADS UP LB'S PER CUB INCH
SO A SB WAS THE WAY TO GO

IF ANY ONE CAN HELP
I COULD USE IT

THANKS
GEORGE
 

·
Registered
Joined
·
10,854 Posts
The B460 is a SMALLER port version of the A460 so, those flow numbers are most likely ficticious.
 

·
Registered
Joined
·
204 Posts
I would like to post some figures for my Blue Thunder B heads ( BBC exhaust port ).

Gerry Cooper @ Advanced Engine Performance ( Coorparoo, QLD, Australia ) was given the job and I'm over the moon with the results. They were flowed with a 2 1/4" test pipe @ 28".

Lift Intake Exhaust Hp
.200 162.9 129.2 332.4
.300 229.3 170.8 467.3
.400 294.4 210.4 600.05
.500 342.8 255.7 698.02
.600 373.1 285.0 761.29
.700 390.9 307.4 795.9
.800 409.6 312.0 834.7
 
41 - 51 of 51 Posts
Top