460 Ford Forum banner

1 - 19 of 19 Posts

·
Registered
Joined
·
403 Posts
Discussion Starter #1
BRC pistons 8 with 15 runs and 4 new, 4.600 bore, A-460 head 13.5 to 1

Crank Specialtys crank Internal, 3.300 stroke

Bill miller rods

$700 OBO open two trades ,need a 1050

Dave (321) 431-7459
 

·
Registered
Joined
·
816 Posts
SLOW! Not much O/T at work. I got my A460 block this week, finaly decided on 533ci. C. Evans did a full port job on my SCJ heads. How do you like FL.
 

·
Registered
Joined
·
403 Posts
Discussion Starter #6
Love Florida. Was at speedworld yesterday working on two super stock cars. Our 1st race is in Bradenton in two weeks. On my way to the track now. Hope to have my junk up and running by april.

If money is tight buy my old combo. Make you a killer deal. May trade if you got some old 460 stuff.
 

·
Registered
Joined
·
403 Posts
Discussion Starter #11
Combo ran real good pulled good from 5000 to 8000. Ran best of 6:11 with junk converter. Went 5:70's with 200 shot. 3000lb with driver Was still 440 cubes more nuts down low than you think. All good parts and open to trade


Cam is 270/280 at 50 with 780ish lift Will get all numbers if you are interested.

321-431-7459

In car video at botton of page http://www.justanothertoy.com/fordzilla.htm
 

·
Registered
Joined
·
962 Posts
ss

Curious why 4.6 hole - did you want the inchs and compression? hell of a deal on the parts, but that 4.6 bore creates its own rules - plus the A heads

Short stroke motor should interest those short distance sand racers
 

·
Registered
Joined
·
403 Posts
Discussion Starter #13
Motor was a 598 then be-stroked for a weight to inch class. crank was $1,800 but as with all odd combo stuff needs the right buyer or CHEAP price. My motor guy just wants it out of his shop.
 

·
Registered
Joined
·
403 Posts
Discussion Starter #15
Well it was 1,800 new and is in great shape, std big ford rods and mains turns up fast.

Roda are aluminum BME 6.860 long need to look at log book but less than 40 runs

10 BRC pistons 8 with low runs and 2 new. C&A rings zero gap 13.5 with A-460 head.

My motor guy wants it out of his shop. Open to trades Need a 1050 and 429 stuff.
 

·
Registered
Joined
·
403 Posts
Discussion Starter #19
Only thing i still have is the rods and pistons. My motor guy still has the cam but i do not recall the numbers. Had 2 cams for this motor one NOS cam and one motor cam. He will sell them let me know if you want the numbers.

Need some 429 pistons... would love to trade
 
1 - 19 of 19 Posts
Top