460 Ford Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
825 Posts
HI
The DOT on the cam gear and the DOT on the crank gear should line up 6 and 12.. the Key way well be ether at 12 if you installed a 0* timing set or off to one side or the other depending if the timing set a advanced or retarded ... But the dots should all ways line up ether way, the key way is what goes off to one side of the other.
good luck take care be safe'
tim
 
1 - 2 of 2 Posts
Top