460 Ford Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
My scat flexplate and edge converter do not leave enough space between converter and flex plate. Measurements leave .050 or so between them. If I add a second plate between the engine and bell housing I should be in spec. Is there any problem with this arraignment?
 

·
Registered
Joined
·
2,292 Posts
Have heard several guys doing exactly that . On one combo I did years ago i needed clearance I made up a new thicker plate in Aluminium
 
1 - 2 of 2 Posts
Top