460 Ford Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
152 Posts
Discussion Starter #1
I have a dove standard bore block that I just picked up from my machinest. it was cleaned tumbles and magged and checked out ok. it is ruff around the distbritor hole. My machinest said it most likley had a dist gear chewed up in it at some time. It can be smoothed out or machined and bushed.not a huge issue but it is the only issue . thanks Justin 503 412 8141 $250 plus shipping.
 

·
Registered
Joined
·
152 Posts
Discussion Starter #6
Sorry guys I missed your replies. The block is in portland Oregon.

My machinist said the area could probably be smoothed over and be ok. or you can machine a bushing for it like the mopar guys run. I guess it's a common fix, but I think it's out of relm to fix. I had another block so I just used that one. I talked to another machinest on the forum and he made it sound like its not a big deal. ..
 
1 - 6 of 6 Posts
Top