460 Ford Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
479 Posts
Discussion Starter #1 (Edited)
Posting for a friend. The car is a 240" car, hard tail, about 10 passes on it, but it's been sitting for about 10 years. One engine is 526" factory off-set ground crank, Wiseco pistons, iron Cobra Jet heads, tunnel ram, roller cam bearings, Jesel rockers, ran 5.0's in the 1/8
The other is a 482" forged crank (He will check for the brand, late 80's purchase) TFS heads, titanium valves, Jesel rockers, sheet metal intake, lifter bores sleeved. Was going to be a Comp Eliminator car is the reason for the small cubes... Ran 4.76 @ 147 (1/8)
Machine work was done at Reher Morrison on both engines.
Power Glide with a 6500 converter... Will need all tires replaced, lots of spare stuff included. Trailer has Onan generator. I'm sure I've forgot plenty of stuff. Everything for $15,000 .... His name is Jerry 817-266-3140 Locat4ed in Fort Worth Texas
 

Attachments

·
Registered
Joined
·
479 Posts
Discussion Starter #2
He says the reason for selling is he's too old to drive, and it's time to quit!
 
1 - 4 of 4 Posts
Top