460 Ford Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,179 Posts
Discussion Starter #1 (Edited)


Here is a truck steel crank offset ground to 3.85 stroke w/2.200 bearing, standard snout, and 1.85 pilot machined in. Mains and rods are fresh .030. Rod journals have been machined to clear Eagle (7.100) 1.007 rod widths. This crank has also been nitrided. Very nice piece if you can tolerate the .030 under.

$600 USPS Money Order + Shipping

Thanks for looking, Bret
 
1 - 2 of 2 Posts
Top