460 Ford Forum banner

1 - 20 of 23 Posts

·
Registered
Joined
·
6,697 Posts

·
Registered
Joined
·
141 Posts
Car & pass looks terrific Joe. Glad you are starting to see positive results from all your hard work & money spent. A 1.24 60ft is very impressive the very first time out with no runs on the car!!! I only expect things to get quicker as you get the chassis & everything sorted out. Take care & we will see you & your dad at Hardinsburg on May 12.
 

·
Registered
Joined
·
141 Posts
PS: Damon your car looks very nice also. With the way it was launching, it reminds me of some of the cars that race with Joe & my driver, Leon Mathis. Of course that is not always a good thing. It tends to be hard on oil pans & headers! Take care & good luck to you!
 

·
Registered
Joined
·
6,697 Posts
kevin93 said:
PS: Damon your car looks very nice also. With the way it was launching, it reminds me of some of the cars that race with Joe & my driver, Leon Mathis. Of course that is not always a good thing. It tends to be hard on oil pans & headers! Take care & good luck to you!
Hey Kevin,

Thanks for the compliment. Fortunately for me I still have the stock K-member and it kind of saved my oil pan. Headers are tucked up next to the floor board (That's why I need the turnd downs) so I only encountered minor damage to 4 of the header tubes.

The Caster Camber Plates took the most damage.

Hope to see you at some of the outlaw races this year. I had planned on racing in the 6.50 class but I'm not sure that I can take that much power out of this engine :shock:

Good Luck May 12th!



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
 

·
Registered
Joined
·
141 Posts
If you get to make some of the Outlaw races, come over to the pits & visit. Be glad to have you stop in. Take care & good luck to you!!!
 

·
Registered
Joined
·
3,956 Posts
kevin93 said:
If you get to make some of the Outlaw races, come over to the pits & visit. Be glad to have you stop in. Take care & good luck to you!!!
Kevin,

Glad to see you on the board! How's about hanging around here more often. We need a man with your knowledge. I sure wish you all had brought your car down. We needed you, and besides that we paid big money.

Later,
 

·
Registered
Joined
·
52 Posts
Hi Iam not sure but I think we bought a front coil over kit from you about this time last year. Your car takes my breath away!!!!!! Will you be running in LIMITED STREET???? Good luck and GOD BLESS B.C.
 

·
Registered
Joined
·
141 Posts
I believe the cowl cover is made by Harwood. I am sure Joe will chime in & confirm this. Looks similiar to the one on my car & it is a Harwood.

Charlie, I really wanted to come down to the BBF, but we were in the midst of making some changes to my car, & we just could not find the time. I will do my best to make it next year!!! It looked like it was a blast!!!

We made some upgrades over the winter to my engine and at our first race we went a 5.29 @ 136.75MPH. We had to weigh 3400 lbs, so I was pretty happy. This is the fastest ET & MPH we have ever run. I believe when Joe gets everything lined out he will be right there with us. Shoot, he might by pass us & then force me to do some more upgrading just to try to keep up!!! You never know about Outlaw heads-up drag racing.

Charlie I do frequent this board on a regular basis & I enjoy it very much!!!! There is a wealth of knowledge on this board & I appreciate you guys sharing it with people who need it. Everyone from what I have watched on this board are extremely helpful & very nice!!!! Joe will tell you I'm just kind of laid back. My driver has most of the knowledge. I just know enough to be dangerous!!!!

Take care Charlie & if you get up around my way some time, stop in & we will shoot the bull.
 

·
Registered
Joined
·
6,697 Posts

·
Registered
Joined
·
686 Posts
Discussion Starter #16
The cowl cover is from Harwood. It's fits about like everything else you buy aftermarket, after grinding for a few hours it bolted right on.

Kevin is the R&D man on his team. He is always lurking behind the scenes on the computer trying to figure out how to pick up a few hundreths here or there. He has one of the nicest cars I have ever seen. It is very well detailed and he has been the guy to beat for the last three seasons.

We will be running OSCA True Street with our car. The first race is on May 12th at Hardinsburg, KY.
 

·
Registered
Joined
·
141 Posts
Damon stop in any time. Be glad to have you. Joe thanks for the compliment!!!! Judging by the photos, I would have to say your car is of the same caliber or better than my car. I definitely know your chassis has to be better than what I have with your 25.4 rating. Your car looks awesome!!!! Can't wait to get a look at it in person. Take care Joe and we will see you & your dad at Hardinsburg.
 

·
Registered
Joined
·
6,697 Posts
We will be running OSCA True Street with our car. The first race is on May 12th at Hardinsburg, KY.
Wish I could make that race. I want to see your car AND Kevin's car run again. It's been too long since I've been to an outlaw race.

I spoke with Eric at No Limit Drag Cars yesterday. Plan on taking my car to him next week for new rear double adjustable shocks, add some bars to my cage so it will cert for under 6.39/9.99 and maybe some wheelie bars. Would also like to runs a few bars to the shock towers for added support.

Hey can I run a 4-Link in True Street :?: :p :mrgreen:

Good luck to both of you and hope it's you two in the finals :wink:



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
 
1 - 20 of 23 Posts
Top