Brand new C-460 bare heads,new C-460 single carb intake,new diamond 4.6 flat top pistons for 6.8 rod 4.5 stroke,new A-460 block bored to 4.6,new crane offset roller lifters,new balancer,new msd dist,new 8 qt moroso oil pan( rear sump),new Meziere electric water pump, 2 1/4" headers, maybe a few more small pieces. cost around $8600 will sell for allot less. Call me at 606 407 2111, e-mail [email protected] will consider some trades.
Some of the stuff is gone or we have changed our mind about selling. The Block and lifters are still available.
504ci (4.40 bore X 4.15 stroke) complete intake to oil pan for sale.
Block: DIVE Block w/ partial Hard Blok fill
Intake: Ford Motorsports 460
Crank: Scat 4340 steel crank w/ 2.20 rod journals
Rods: Eagle ESP 6.700 H beam w/upgraded ARP L-19 bolts
Cam: Comp Cams with .762 intake/exhaust lift...
I have for sale a set of 427 FE Long Tube Manifolds. They came off of my 63 Galaxie before I dropped my 521 big block in the car. I am asking $1500obo. I will cover shipping. I am located in Vista California and I can be reached at [email protected] Let me know if you have any questions.
I am very new here on the site so forgive me if I ask any ignorant questions. I bought a 75 Ford with a 360 (supposedly rebuilt) that had a crack in the block. I'm replacing it with a rebuilt 460 but was told I needed a bell housing for the Transmission. The information I got off the Tranny tag...
I have a 460 that I believe to be a 1971 with the crank driven power steering pump. In as removed condition, was running fine fine while I was in Idaho but when I got back to Texas I had trouble getting the higher octane gas and it would ping. The Mad Porter built me a beast that tolerates...