[DPSCoupe361]

I have a set of ProComp BBF heads, New in Boxes ready to go. Slight pocket porting done to them. Also have a Jomar stud girdle for BBF.

Heads $1200 shipped

Stud girdle $125 shipped

Truck Pan for fox swap $85 shipped

High Volume oil pump BBF(new) $35 shipped

Master Rebuild Kit for C6 from Pioneer $85 shipped

361-443-0153 Located in Corpus Christi, Texas
http://i257.photobucket.com/albums/hh216/DPSCoupe361/0113091536.jpg
http://i257.photobucket.com/albums/hh216/DPSCoupe361/0113091531.jpg

 

[DPSCoupe361]

.

TTT

 

[FE_rex]

got a part# on the cam?

 

[DPSCoupe361]

.

Lunati Part # from summit is 61605.

 

[FE_rex]

Appreciate it - one step too big for me below is the info on it for anyone else to see

Part Number: LUN-61605
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 2,500-6,500
Intake Duration at 050 inch Lift: 241
Exhaust Duration at 050 inch Lift: 249
Duration at 050 inch Lift: 241 int./249 exh.
Advertised Intake Duration: 284
Advertised Exhaust Duration: 292
Advertised Duration: 284 int./292 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.582 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.600 in.
Valve Lift with Factory Rocker Arm Ratio: 0.582 int./0.600 exh. lift
Lobe Separation (degrees): 110

 

[DPSCoupe361]

TTT Thanks buddy

...

 

[DPSCoupe361]

Need stuff gone, make offer!

...

 

[54bigb]

What heads do the Jomar stud gridles fit?

 

[DPSCoupe361]

.

They fit the OEM heads and cobra jet heads and the ProComp heads im selling also.

 

[54bigb]

You have a PM

 

[DPSCoupe361]

Two pics are up

...

 

[DPSCoupe361]

TTT

...

 

[DPSCoupe361]

TTT

New stuff added and new prices.

 

[ndmus88gteng]

cam

I didn't see no stinkin cam senoir,, LOL j/k ,, do you have that cam for sale , and how much.




guys would it be a good fit , for a 77 460, with straight up chain, re-built stock dove-c's, csr elec. water pump, ( maybe might save it for my next build, ) rpm intake. got to get all the pieces together first, but I got a stock 77 with 80 thou miles,



is the comp. ok with dove-cs, and would this be a good cam to run , in 90 hatch lx. street/strip. more like terror/strip. I hope , just gettin my car today. will post pics in the build section, for starters. thanxs Rick

 

[DPSCoupe361]

Cam is sold and Girdles just sold today

...

 

[bronco 460]

do you have a part number for the c6 kit.thanks

 

[DPSCoupe361]

Kit

I will check in the morning