460 Ford Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
215 Posts
Discussion Starter #1
Got a set - thanks Brian!


Already have 4.500 crank, 6.700 rods.

Looking for 4.440 dish pistons for 95cc Edelbrock heads to keep compression below 10:1. Looks like it will need to be around 22cc dish or a scootch more.

If they come with pins and rings, so much the better!

This will be a mostly street motor, so the most economical pistons will probably work fine.

Tom
 

·
Registered
Joined
·
106 Posts
I think a guy on here has some forsale for 450.00 you will need to look through the post but his name is bob557 or 557bob ??? he just put them to the top about 2 days ago
 

·
Registered
Joined
·
215 Posts
Discussion Starter #3
Thanks HOR,

Found the ad - unfortunately the pistons are for 6.800 rods; I have 6.700. Also, they are flat top & I need 22cc dish. Wish they were the correct ones!

Tom
 
1 - 3 of 3 Posts
Top