460 Ford Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1,633 Posts
Discussion Starter #1
my motor will be done next weekend - finally and im curious to what you guys think it will make- im thinking of taking it to the dyno..

Her is the low down on it 572 cubes

svo block
4.600 bore 11.8 compression
4.3 stroke
large lower 800 lift roller
a-460 heads flow 450ish intake
TFS single plain intake with HP 1250 dominator
2 1/4 headers- into 5 inch bullet mufflers

gues away - lets see who gets the closest
 

·
Premium Member
Joined
·
238 Posts
ONEBAD555NOTCH said:
my motor will be done next weekend - finally and im curious to what you guys think it will make- im thinking of taking it to the dyno..

Her is the low down on it 572 cubes

svo block
4.600 bore 11.8 compression
4.3 stroke
large lower 800 lift roller
a-460 heads flow 450ish intake
TFS single plain intake with HP 1250 dominator
2 1/4 headers- into 5 inch bullet mufflers

gues away - lets see who gets the closest
did you dyno it yet 725 to 750 hp
 
1 - 9 of 9 Posts
Top