head work& cams
1 - 2 of 2 Posts
Joined
·
5,554 Posts
Yes but every case is different and depends on the cam and the engine combination into which it is being utilized. You need to provide a lot more detail on all the components being put together.
Paul
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
94 460 hedman
Engine TechAny one have any pics of their crossover/y pipe and what was done to make a PCV pipe? Working one 94 f350 with replaced exhaust system. I’d like a bit of a game plan before I tear manifolds off,looks like the whole crossover needs to drop to make these work. Also what was used to hold dip stick...- 2
- 98
-
Olweldinrig · updated
-
p51 flat tappet
Engine TechDoes any one know of a valve spring that sets up at 2.00 for p51 heads for a flat tappet cam? Pressure needs to be around 150# on the seat and 380# open at 1.250. These number come from comp cams specific for their cam. But their spring does not set up at 2 inch installed height. The spring I...- 1
- 149
-
Engine Choice
Engine TechI've been looking for an engine for my 1953 F100 for a while, I still have the running original in it, but I may sell it or keep it for nostalgia. I bought 1986 302 EFI that was running when pulled for $365 CAD on a stand with a chain on the advice of my mechanic/friend. I really didn't want a...- 16
- 712
-
munnster460 · updated
-
Cam lobe sound
Engine TechI have a custom cam made for My 460. Just wondering if someone can tell by the numbers how much of a idle cam sound I will have? 236/256 .525 lift on a 106. Thanks- 2
- 207
-
Cam lobe sound
Engine TechI have a custom cam made for My 460. Just wondering if someone can tell by the numbers how much of a idle cam sound I will have? 236/256 .525 lift on a 106. Thanks- 0
- 73
Join now to ask and comment!