460 Ford Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,637 Posts
I think its just a heat cross over for the choke on the carb. this would match the manifold and just provide hot air to a small pipe.

Ace
 

·
Premium Member
Joined
·
1,402 Posts
powerstrokeace said:
I think its just a heat cross over for the choke on the carb. this would match the manifold and just provide hot air to a small pipe.

Ace

I agree.
I run the D0OE-R on my engine, and the Felpro SCJ gaskets work fine.
 

·
Registered
Joined
·
133 Posts
I looked I don't seem to have a volume 2 ford manual that goes back that far.

From the picture it looks like the hole dead ends in the head. If that is the case I would have to agree that is a port for the choke tube.
 
1 - 6 of 6 Posts
Top