460 Ford Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
73 Posts
Discussion Starter #1
Have TOO MANY parts to list, but here is a small portion of what is available. Please call for more details or any questions; I do have some old cars that will be listed soon. (940 886-7137) call or text anytime day or night.

Small Block Ford – DART Block
4.125 bore with 4 bolt splayed main caps in center with SVO mains
All machine work done and ready to ship - $1800 plus shipping or OBO

Complete 408 Small Block Windsor Nitrous Motor
Intake Super Victor JR, AFR 205 Heads with Scorpion Rockers with extensive port work
JE Pistons with Eagle H Beam rods 4340 forged, Eagle 4340 Forged Crank, Ford Racing Timing Chain, Ford Racing Billet Girdle with studs, Lunati Performance Racing Cam,
Motor made 711 HP on Dyno with just 788 ft pounds of torque on a 100 shot of nitrous
Asking $6500 or will entertain SERIOUS offers

1 set of C3 Yates Heads - Heads are bare but will need to install 2 seats that will be provided
$1200 plus shipping or OBO

1 sheet metal intake with 2 x 4 top built by Voss Racing for small block Ford 9.2 Yates headed motor. Very nice! Has been drilled for nitrous. $1400 plus shipping or OBO.

1 Canton Dry Sump Oil Pan
Will fit Small Block Ford – Fontana Aluminum Block
$550 plus shipping or OBO

Several 4340 Stroker Cranks and Rods - New in box anything for Ford and Chevrolet
Contact for more info and pricing. Too much to list.

Big Block Ford Stroker Rotating Assembly (514 ci)
Wisco Dome Pistons, Eagle H Beam Rods, Ohio Crank
Will include all rings, rods and main bearings, damper and balanced
$1400 plus shipping or OBO

871 Polished BDS stage 3 Blower – Practically new with less than 10 runs. Comes with 7 pullies extra idler, belt, injection hat and 2x4 carb plate. Asking $3000 or OBO plus shipping.

Big Block Ford Blower Intake - will fit Cobra Jet heads
$675 plus shipping or OBO

(2) 427 cross bolted FE Blocks - 30 over. I do have some parts to build a complete motor.
Asking $1500 a block plus shipping or OBO.

Parker 302 Small Block Ford - New in Box
Polished - $200 plus shipping or Satin - $175 plus shipping

Jacob’s Mastermind Nitrous Controller - $145 plus shipping

1 set of 28x10.5 Hoosiers Slicks – Great Shape with about 20 passes on them.
$175 plus shipping or OBO

1 set of Mickey Thompsons 28 x 9 (with tubes) – In great shape but fender did rub a little on the side. $125 plus shipping or OBO

Big Block Chevrolet 450 hp 454 out of 1970 SS Chevelle
STD bore, 4 bolt main block, NOT a 512 casting, does have a steel crank, dimple rods, and factory standard GM dome pistons. Heads are complete redone with 188 casting. Motor is complete minus Carburetor, Intake and Distributor, Has new chrome valve covers.
$2700 plus shipping or OBO

Competition Engineering 3-way Adjustable Drag Shocks (Brand new in box)
$40 each plus shipping obo

C2610 TWO IN STOCK
Manufacturer's Part Number: Internal Design Monotube
Adjustable: Yes
Gas Charged: No
Bushing Material: Rubber
Bushing Color: Black
Boot Included: No
Extended Length (in): 15.340 in.
Collapsed Length (in): 9.620 in.
Body Diameter (in): 1.630 in.
Upper Mount: Stud
Lower Mount: Bar pin

C2710 TWO IN STOCK
Manufacturer's Part Number: Internal Design Monotube
Adjustable: Yes
Gas Charged: No
Bushing Material: Rubber
Bushing Color: Black
Boot Included: No
Extended Length (in): 22.43 in.
Collapsed Length (in): 13.21 in.
Body Diameter (in): 1.630 in.
Rear Drag Shock

C2740 TWO IN STOCK
Manufacturer's Part Number: Internal Design Monotube
Adjustable: Yes
Gas Charged: No
Bushing Material: Rubber
Bushing Color: Black
Boot Included: No
Extended Length (in): 20.16 in.
Collapsed Length (in): 11.81 in.
Body Diameter (in): 1.630 in.
Rear Drag Shock

C2730 TWO IN STOCK
Manufacturer's Part Number: Internal Design Monotube
Adjustable: Yes
Gas Charged: No
Bushing Material: Rubber
Bushing Color: Black
Boot Included: No
Extended Length (in): 23.62 in.
Collapsed Length (in): 14.15 in.
Body Diameter (in): 1.630 in.
Rear Drag Shock
__________________
 
1 - 2 of 2 Posts
Top