460 Ford Forum banner

1 - 20 of 58 Posts

·
Registered
Joined
·
518 Posts
Discussion Starter #1
Will be dynoing this combo Saturday, D1VE block, center three caps four bolt, 4.15 X 4.440, 13.6 - 1, Iron CJ's From Scotty J., Edlebrock Victor, 1000cfm Pro Systems, 820/780 lift, 280 ish 290 ish @ 0.050 , 2.25 x 4 homemade headers

Any Guess on HP / Tq / RPM peak...?:D
 

·
Premium Member
Joined
·
5,554 Posts
Will be dynoing this combo Saturday, D1VE block, center three caps four bolt, 4.15 X 4.440, 13.6 - 1, Iron CJ's From Scotty J., Edlebrock Victor, 1000cfm Pro Systems, 820/780 lift, 280 ish 290 ish @ 0.050 , 2.25 x 4 homemade headers

Any Guess on HP / Tq / RPM peak...?:D
854 hp @ 7600 rpm :rolleyes:
 

·
Registered
Joined
·
3,759 Posts

·
Registered
Joined
·
895 Posts
dyno

When you hitting the dyno ?

Where are you from Columbus Ohio ?
I will be down in Ohio picking up some tractor parts in June sometime, you be ready for a pull ?
 

·
Registered
Joined
·
518 Posts
Discussion Starter #15
Dyno ing this Mornin..... Headed there now, hopefully have er on the track in a couple weeks if all goes well today....
 

·
Registered
Joined
·
897 Posts
Will be dynoing this combo Saturday, D1VE block, center three caps four bolt, 4.15 X 4.440, 13.6 - 1, Iron CJ's From Scotty J., Edlebrock Victor, 1000cfm Pro Systems, 820/780 lift, 280 ish 290 ish @ 0.050 , 2.25 x 4 homemade headers

Any Guess on HP / Tq / RPM peak...?:D
How much work is done to the Victor? Are you using a Dominator Victor?

Did I sell you that cam last year?

What was the 810 HP combo?
 

·
Registered
Joined
·
518 Posts
Discussion Starter #19 (Edited)
No Gary I got the cam somewhere else
Per the engine owner I wont be divulging exact cam specs or intake details but well just say Vic Edelbrock may not recognize this manifold lol
And yes it is a dommy flange
 
1 - 20 of 58 Posts
Top