460 Ford Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
765 Posts
I have a nice used 4 vane Moroso setup i dont need. Would sell w. mount, pulley, fittings and Star Machine adj vacuum regulator.
 

·
Registered
Joined
·
86 Posts
I have a Star Machine Vacuum pump (part number STR.03.01.000), that has a 36 tooth aluminum pulley on it (part number STR.02.07.008). I also have a air/oil separator catch can (part number STR.02.09.00AN) and a engine vacuum baffle for your valve cover (part number STR.06.11.001). It also comes with a rear mounting plate and bolts (part number STR.99.06.10). Finally to drive the pump i have a 16 tooth gear for the crank (part number STR.99.09.016). All of those parts can be found here: http://www.starvacuumpumps.com/catalog/

To drive the pump I have a Jones racing drive hub that bolts to the front of your crank pulley (Part number DH-8101-WC-F4-460).
This part can be found here: http://www.jonesracingproducts.com/csDh.html#frd

Let me know if your interested.
 

·
Registered
Joined
·
86 Posts
Hey guys sorry it's taken so long to respond here. I would like to get $800 for the whole setup. I will even thrown in all my 12 AN fittings for the pump, catch can, and valve cover baffle. I am in Canada this week for work but this weekend I will make an official post stating the price again, the part numbers of everything, and pictures. All items were used on a street truck for just over 2 years. Price new for all the items I mentioned above is around $1300.
 

·
Registered
Joined
·
26 Posts
hello, i have a set up that has an older gz motorsports pump,vacuum regulator, -12 lines,can,and pulleys all for 350$ shipped,let me know if interested,thanks
 
1 - 7 of 7 Posts
Top