460 Ford Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter #1
Well, i've gone to the point of no return. I finally ordered my 545 kit!

I gave Barry over at Survival Motorsports a call, and was on the phone with him for about 20 minutes. Nice guy, very knowledgeable and helpful! After much discussion, I settled on the 545 kit. Dished Diamond pistons, scat forged/balenced rotating assembly, and most likely the 6.8 rods.

Stay tuned, this is going to be a monster. Next up is the P51 heads, and machine work!
 

·
Registered
Joined
·
104 Posts
Discussion Starter #3
Thanks Ed.

Your advice has played a big part in helping me prepare for this serious undertaking. I'd also like to thank the people of this site for all the information i've learned! Just searching, lurking, and reading the stickies has given me all sorts of great information!!
 
1 - 11 of 11 Posts
Top