460 Ford Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
565 Posts
Discussion Starter #1
I have an MSD #8578 Pro-Billet small diameter dizzy with a bronze gear installed and a set of Taylor #79053 10.9 Race wires for sale. Both were used on my 557 only for dyno use... roughly 30 pulls. The wires were a cut to fit set, put together at full length so they are plenty long and can be trimmed to fit. Wires have 135* boot. I also have the cast gear that came with the dizzy and all original packaging etc...

I have roughly $420.00 invested in the deal, will take $300 plus shipping, or can deliver to the seminar in Owensboro this weekend free of charge...



 

·
Registered
Joined
·
1,419 Posts
Would you separate the wires?
 

·
Registered
Joined
·
1,419 Posts
You are correct, a pn 8578 is for the 351W. Must be a pn 8577.
 

·
Registered
Joined
·
1,419 Posts
557FOX said:
It is the 351W dizzy. It also fit the 385's perfect, but is shorter and narrower. Once the gear is changed it is a direct drop in...
Seth, I learned something again. I didn't realize you could just change the gear and make it work. I sent you a pm, also.
 
1 - 12 of 12 Posts
Top