[80cobra]

I have some probe .080 over dished pistons 10:1 with a 74cc head and a cast crank I would like to trade. Crank is a scat 4.5 crank pistons go with the crank.

I would like a forged crank and .080 over pistons but I want a flat top or a small dome. I have the scat h beams so if you want to trade a whole rotating assembly we could do that I will throw in cash. Everything is new in the box though.

 

[MNMustang1]

Cory, If you have -22cc dish probe your going to be at at 11.7:1 on a o decked block. Probe lists it at 10.5:1, but they are wrong. Are compression are you looking for?

 

[80cobra]

no kiddin? thats about what I want maybe 12:1

 

[MNMustang1]

Ya, they list the same piston in a 4.39 bore at 11.29:1. Larger bore will increase compression. Have you decked your block? Cut the heads if you need to.

 

[80cobra]

block was just squared not brought down to zero. I think I will mill the heads.