460 Ford Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
707 Posts
Discussion Starter #1 (Edited)
LOOKING for a GOOD DEAL on a PORTED set OF 429 / 460 ALUM or STEEL HEAD'S WHAT DO YOU HAVE ?????

I need 1 GOOD DOOE-R HEAD
OR
OF DOOE-R HREADS

WOULD BUY A
good PAIR of
ported 429 / 460 DOOE-R heads
alum or steel

NEED A GOOD SET OF HEADS

WHAT DO YOU HAVE


I do have
{ 1 } dooe-r head S
freash from the mad porter
need a mate

or

a pair to have port matched

or

what do you have

?????????????????????????????????????



I HAVE HEADERS FOR BOTH
THE
FORDS & CHEVY { A460 CHEVY } PORT'S
 

·
Registered
Joined
·
21 Posts
D3 Heads

I have a set of D3's ported to a head slice from Scott Johnson. They have new guides and have been cut for 2.19 intake and 1.76 exhaust. The pedestals have not been cut yet or drilled and tapped for screw in studs.
 

·
Registered
Joined
·
228 Posts
here is a set of DOVE heads fresh off a engine with 1500 miles, I originally put these heads on back in 2004. Now plans change and time for a new happy home.
Dove castings Cobra jet intake ports 2.250 stainless valves 1.76 exhaust.
No stripped holes, screw in studs, flat deck. fully ported, comes with exhaust port plates. Heads, valves and guide plates, comp pushrods too!
these heads made 448 rwhp in a 69 mustang in 2005 with a mild cam [email protected] isky hydraulic cam, the cam and lifters are for sale too, all the lifters are matched on the cam lobes, no mixed up lifters!
I have pictures and will add them next few days.
Javier
just listed top of thread
pictures of heads here>>>>> www.ranchopower.com
 
1 - 6 of 6 Posts
Top