460 Ford Forum banner

looking for block to motor mount plates

2K views 2 replies 2 participants last post by  megawat 
#1 ·
Looking for block to motor mount plates circa 1983-1997 f350 (OEM e3tz-6028-C RIGHT AND e8tz-6029-b)
 
#2 ·
Are the 2wd and 4wd the same? I have a pair from an 85 or so but no numbers on them. They are about 6" long with the block holes in the center and a bigger bolt on each end that held a thin mount with steel around it. Not sure that's what you need though..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top