460 Ford Forum banner

mass air 460

1030 Views 2 Replies 3 Participants Last post by  raysmust
i have a 88 f-350 with a 501 bbf.
i want to switch to mass flow efi.
i see that there are several kits for this.
can i do this with a 90mm mass flow meter and a computer and wires from the wrecking yard?
what should i look for?
would a computer from a mass air 351 work ?
1 - 3 of 3 Posts
i have a 88 f-350 with a 501 bbf.
i want to switch to mass flow efi.
i see that there are several kits for this.
can i do this with a 90mm mass flow meter and a computer and wires from the wrecking yard?
what should i look for?
would a computer from a mass air 351 work ?
Yes you can, a Lightning mass air ecu and maf meter wich is a stock 90mm meter, or an A9L mustang ecu will work too, you need to get the wiring, and you need to tune the ecu, Moates stuff would be good, or just simply get a SCT X3
There is a company in Michigan that sells everything you need to do that.

Dunne-Rite Performance

616-828-0908
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top