460 Ford Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
1,637 Posts
Discussion Starter #1
Is there a way for all forum members that have some type of parts business to put a listing in this area as a sticky and all the products they sell?
This would be very helpful when a member is looking for parts they could contact these people on the forum first.

In other word put a sticky under the words PARTS HOUSE
Next have each member put there name or business name and list all the products they sell. Then this way when a member needs some thing they can look here first and contact them direct by PM or E-mail.

Ace
 

·
Registered
Joined
·
381 Posts
AD Performance – [email protected]
http://www.adperformance.com/

Adney Brown –Performance Crankshaftinc
His signature describes his services pretty well, I think:
PERFORMANCE CRANKSHAFT INC,. YOUR FIRST STOP FOR CRANKSHAFT REPAIR , MODIFICATIONS AND CUSTOM CRANKSHAFTS /; ROTATING ASSEMBLIES ... coffee donuts and entertainment available at no extra charge ... shop phone 586-549-7557 lounge phone 313-873-6588

Cars By Carl
http://www.carsbycarl.com/

Lem Evans – Lem Evans
http://www.bfevansraceparts.com/

Jon Kaase - JonKaase
http://www.jonkaaseracingengines.com/

Survival Motorsports – Barry_R
http://www.survivalmotorsports.com/


Other vendors:

D & D – 460FOXTECH
Bob
D&D AUTOMOTIVE SPECIALTIES
FORD & MUSTANG PERFORMANCE
Winning Ford combinations since 1987!!
610-432-0041 (phn.)

Diamond Pistons – 429sluggo
[email protected]

Several vendors also are Diamond dealers.
Eric Simone also offers Boss 429 rockers on his own-
http://www.shotgunhemiparts.com/

Charlie Evans – c.evans
1231 Upper Trace, Owensboro, KY 42303 270-685-4654
custom adapters, specific tools, cylinder head work, etc.

IDT & Eliminator Products- jjc522
Jay
(810) 395-2779
(888) 577-0438
(810) 395-8056

Joe's Race Parts
From Mild to Wild...
And Everything In Between
www.joesraceparts.com

Scott Johnston – The Mad Porter
http://reincarnation-automotive.com/
10610 Golden Given RD. #2
Tacoma, WA. 98445
253-988-6648

Jomar Performance – jpb6061
http://www.jomarperformance.com/
Lem Evans is a Jomar dealer…they sell direct as well.

Jon Thee (header flanges) - Jon
MO

High Flow Dynamics – Paul Kane
http://www.highflowdynamics.com/

Randy Malik - rmcomprandy
custom engine building, parts, etc.
586-909-1591

Dave McLain - DaveMcLain
custom engine building, parts, etc.
http://www.mclainsautomotive.com/

Mike Phillips
engine building, dyno services, flow bench work, associated with Charlie, Lem, Philip & a cast of Kentucky others
http://automachperf.com/

Bret Powell - Bret Powell
cylinder head porting, flow bench work, truck pulling
PFC Engines 573-793-2177
Iberia, MO


Phillip Oakley – OAKLEY MOTORSPORTS
(270) 785-4300
[email protected]
Quick Fuel carbs, Hoosier tires

Chris Straub - cstraub
http://www.straubtechnologies.com/


Hope this is what you were asking for. When I first seen it I printed it for my own use when needed. Hope this helps you. I agree with you it'd be nice to see it under a sticky.

Um hmmm, what do you think Don? Your the top dog here now.
 

·
Registered
Joined
·
707 Posts
Is there a way for all forum members that have some type of parts business to put a listing in this area as a sticky and all the products they sell?
This would be very helpful when a member is looking for parts they could contact these people on the forum first.

In other word put a sticky under the words PARTS HOUSE
Next have each member put there name or business name and list all the products they sell. Then this way when a member needs some thing they can look here first and contact them direct by PM or E-mail.

Ace

I WOULD LIKE TO SEE A
PLACE JUST FOR PEOPLE
THAT SELL USED PARTS { NOT A BUSINESS }
&
A PLACE FOR BUSINESS THAT SELL NEW PART's
&
IF THE BUSINESS HAS SOME USED PARTS
THEY COULD LIST THEM IN IN THE USED PARTS
BUT HAVE THE NAME OF THE
BUSINESS IN A DEFFERENT COLOR
SO YOU WOULD KNOE THEY WERE A BUSINESS
AS SOON AS YOU SEE THERE ADD
 

·
Premium Member
Joined
·
1,974 Posts
It would be a good idea to check with all of those people on that list... or their websites, if you are looking for something specific. Never know what they might have around, new, used or whatever.

Before that vendor list post was made, I spent a good deal of time using the search function a while back and found that one of the Evans boys had a set of 1.8 Miller rockers sitting on the shelf well after Paul Kane sold out and I wanted to have a spare set on my shelf. Carl sells Diamond pistons, even though it doesn't say it in that list... it is on his site. Just because it is not on their website, doesn't mean they don't have it.

If you lose track of this post, a quick search of "vendor list" will help you find a copy again.

Tom
 

·
Registered
Joined
·
318 Posts
I would suggest anyone reading this to print a copy or two of this list. You never know when you'll need to call on one of these fine vendors and your not near a computer, or maybe if it becomes taboo for a business/vender to post items for sale without paying the new piper. I hate to think it will come to that though. Just a thought. Dave S.
 

·
Registered
Joined
·
2,227 Posts
I'd like to be included on the list. IDT & ELIMINATOR PRODUCTS.
Thanks,
Chuck.
 

·
Registered
Joined
·
708 Posts
Contact Info at: www.eliminatorproducts.com Under dealers.

Chuck, you are on the list & have been for quite some time...waaay over a year, I'd guess...at least, you are on my original list....;) As a matter of fact, I still have your old DblADigger forum name listed on it as well as your current name. About 20 people have taken that list and copied/pasted, etc., and usually somebody gets dropped off in one place or another. I see that Joe Mayabb is on this one, and he's the last one I added, until three more vendors were added today. (edit) I updated your info on the list as I didn't have your address until now. :)

In response to several people asking, I PM'd Chilly & Jones sometime back and asked if the list could be made a sticky....never got a response from either, so I dropped the subject. (shrugs)
 

·
Registered
Joined
·
6,970 Posts
Chuck, you are on the list & have been for quite some time...waaay over a year, I'd guess...at least, you are on my original list....;) As a matter of fact, I still have your old DblADigger forum name listed on it as well as your current name. About 20 people have taken that list and copied/pasted, etc., and usually somebody gets dropped off in one place or another. I see that Joe Mayabb is on this one, and he's the last one I added, until three more vendors were added today. (edit) I updated your info on the list as I didn't have your address until now. :)

In response to several people asking, I PM'd Chilly & Jones sometime back and asked if the list could be made a sticky....never got a response from either, so I dropped the subject. (shrugs)
Mike i might have been the one to have messed that up .......oops



100% free webcam site! | Awesome chicks and it is absolutely free! | Watch free live sex cam - easy as 1-2-3
 

·
Registered
Joined
·
708 Posts
Mike i might have been the one to have messed that up .......oops
"Misquoted post" whore. :D

No big deal, it's been quoted/linked/pasted quite a few times, or quoted off a quote, so it's bound to get messy along the way. I found it on the Bullet a couple of months ago, missing a few key pieces.
 

·
Registered
Joined
·
708 Posts
It would be a good idea to check with all of those people on that list... or their websites, if you are looking for something specific. Never know what they might have around, new, used or whatever.

Before that vendor list post was made, I spent a good deal of time using the search function a while back and found that one of the Evans boys had a set of 1.8 Miller rockers sitting on the shelf well after Paul Kane sold out and I wanted to have a spare set on my shelf. Carl sells Diamond pistons, even though it doesn't say it in that list... it is on his site. Just because it is not on their website, doesn't mean they don't have it.

If you lose track of this post, a quick search of "vendor list" will help you find a copy again.

Tom
That's an excellent point, and pretty much what I was aiming at when I originally wrote the list...TALK to these guys and determine who is best for YOUR particular case.

Yeah....I didn't ever plan to give more than a general description of a vendor's business....just because product lines are added & dropped and I figured I'd go bonkers (well, more so, anyway) trying to keep up. Besides, I wanted to refer people to the individual websites and to encourage them to talk to the vendors to find a good match. Actually, in the specific case of Diamond, if memory serves, Eric suggested talking to the dealers because their pricing would be better than dealing direct. I originally listed only websites (unless there wasn't one), but I discovered that a lot of guys printed the list out...so I added phone numbers, faxes, addresses, and e-mails as best as I could find them.

I also contemplated making a distinction between stocking vendors, and "drop-ship" vendors, but, again, I concluded that a potential buyer needed to ask for him/herself & figure out who was best for their needs.

Beyond that, my criteria were A) I made the distinction between stroker kit vendors and others because it seemed to be the most common question; and B) the vendor had to be a regular poster here (or be directly connected/involved with one). A couple of these guys don't post much anymore, but I haven't necessarily dropped them.

Actually the whole thing sorta snowballed & got more involved than I expected.
 
1 - 15 of 15 Posts
Top