460 Ford Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
151 Posts
Discussion Starter #1
I have a brand new Holley mechanical fuel pump for a ford 460. It is a 85gph pump asking $75obo.

I have a brand new set of Lunati solid lifters for a 429/460 engine.
im asking $75.00obo.

I have a barely used crane cam for a 429/460 engine. It was broken in and torn back out with only 400 miles on it. All the lobes and bearing sufaces look very usable. asking for $50.00obo.
CRN354551
Hydraulic flat tappet
Operating RPM Range 2,500-5,500
Intake Duration at 050 inch Lift 226
Exhaust Duration at 050 inch Lift 230
Advertised Intake Duration 288
Advertised Exhaust Duration 292
Intake Valve Lift 0.522 in.
Exhaust Valve Lift 0.530 in.
Lobe Separation (degrees) 112

I have a brand new set of iEquis gages. ford fuel gage, volt gage, oil pressure gage, and a 8000rpm autogage tach. I would like $75.00obo for all 4 gages

I've got a complete front runner setup for a 429/460 with v-belts. Coes with all brackets, bolts, power stearing pump and alternator. Im asking $75.00obo
IMG00037-20100913-1228.jpg

IMG00038-20100913-1228.jpg

IMG00036-20100913-1227.jpg

IMG00035-20100913-1226.jpg

IMG00041-20100913-1315.jpg
 
1 - 6 of 6 Posts
Top