460 Ford Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
359 Posts
Discussion Starter #1
Fellas -

I have a 9" 3.25 open 28 spline center section; just looking for a traction lock unit to install. Would consider a locker as well, if the price is right. On a budget, so probably not interested in a 31 spline unit or a complete center section.

Will be going in a 66 Fairlane GT convt; healthy 390 and 4 sp.

Thanks,

Scott
 

·
Registered
Joined
·
454 Posts
traction lock

hey scott,i have a 31 spline traction lock,it needs new clutches.don't remember bearing size,it's still in my truck.i'll take $85 shipped.pat
 

·
Registered
Joined
·
359 Posts
Discussion Starter #3
hey scott,i have a 31 spline traction lock,it needs new clutches.don't remember bearing size,it's still in my truck.i'll take $85 shipped.pat
Pat -

Price is fair, but I'm holding out for a 28 spline unit now so I don't have to swap axles.

THanks,

Scott
 

·
Registered
Joined
·
962 Posts
a

Traction lock indicates more grip wanted - More grip, more stress on the axles, there was a reason Ford put 31 spline axlels in the higher HP cars - you may be safe if you dont mount up slicks, but pushing your luck - MHO
 

·
Registered
Joined
·
187 Posts
I have a 9" 28 spline center with an Auburn possi and 4:11. Less than 500 street miles and less than 12 passes in a 13.90 Ranchero. (yeah not fast, point is that it wasn't in a 9-10 sec car getting beat on) 275 plus shipping
 

·
Registered
Joined
·
928 Posts
I have a 28 spline tracloc sitting here that needs new clutches was thinking it would be worth $100 + shipping if your interested.
 

·
Registered
Joined
·
359 Posts
Discussion Starter #7
I have a 9" 28 spline center with an Auburn possi and 4:11. Less than 500 street miles and less than 12 passes in a 13.90 Ranchero. (yeah not fast, point is that it wasn't in a 9-10 sec car getting beat on) 275 plus shipping
PM sent.

Thanks,

Scott
 

·
Registered
Joined
·
359 Posts
Discussion Starter #8
I have a 28 spline tracloc sitting here that needs new clutches was thinking it would be worth $100 + shipping if your interested.
PM sent.

Thanks,

Scott
 

·
Registered
Joined
·
89 Posts
Pat -

Price is fair, but I'm holding out for a 28 spline unit now so I don't have to swap axles.

THanks,

Scott
I have 2 sets of 31 spline 9 inch axles, both are stock length 1 set from 68 tbird the other from 79 f100. You can have both sets for 50.00 plus shipping.
 

·
Registered
Joined
·
3,712 Posts
if any of you need your trac-locs rebuilt , i rebuild them, price depends on what they need,

i have a few new cases left also if needed



-rich
 
1 - 11 of 11 Posts
Top