[Awgf150]

I’ve got a question hopefully someone can answer
I’ve got an 89 f150 2wd truck that I’m swapping a 460 bb into I’m planning on running an e4od Tranny since that’s what I have with a quick 2 controller
I’m wondering if there are any factory driveshafts that will fit my application or what would be the cheapest way to get a driveshaft made
Once again
89 f150
Rwd
E4od
8.8 rear

 

[taylorteamracing]

I found a place on ebay (regular machine shop) they built me a 60" with 1330 ends for the 8.8 with ujoints shipped 235.00 summit racing also will make you a shaft

 

[Awgf150]

Thanks seems like eBay is the way to go I’m kind of new to this so this might be dumb but
Is the yoke have a certain name or would it just be called an E4od yoke

 

[taylorteamracing]

Oliver's drive shaft on eBay I am using there shaft in a blown 545 ci big block no issues 209.99 any length any style ujoint or even a conversion joint

NEW 2 U-JOINT STYLE DRIVESHAFT made with 1310 or 1330 or 1350 U Joints | eBay

ONE of the following U Joint series Can be made to. Made of 3" . 083 DOM tubing depending on the length of shaft needed. Can be made from 20" to 60" If you require another length. Let us help you with all your driveline needs.

www.ebay.com

 

[slowride]

Check out Tom Woods Driveshaft. They specialize in 4x's but your truck doesn't know the difference. I've used them on my '31 and '32. Great product, quick build and shipping. Website has a LOT of info you can put to good use.

Tom Wood's Custom Drive Shafts

Trail Tested, Competition Proven, Show Quality Driveshafts, Slip Yoke Eliminators for Jeep Wranglers, Cherokees, Ford Broncos and more.

4xshaft.com

 

[Awgf150]

Thanks Bud I’ll check them out 👍🏻