460 Ford Forum banner

new probe pistons 10663-080

1810 Views 7 Replies 4 Participants Last post by  wayney
these have a compression height of 1.35, flat top, std valve relief,.080 over bore (4.440), .990 pin they are for a 4.300stroke with a 6.800 rod or 4.500 stroke with 6.700 rod. they are new in the box with pins, ring supports, pin locks. also included are a new unopened box of total seal file fit rings . $500 located in columbus, oh

thanks,wayne

Attachments

See less See more
3
1 - 8 of 8 Posts
What would the compression be with 74cc heads?
the probe web site states between 13.16 and 13.72 depending on crank stroke and rod configuration.

thanks,wayne
piston's

Please give me a call. Thanks Ted--803-528-8633
If you have a need for these, don't hesitate as I can attest to Wayne being an OUTSTANDING seller who does exactly what he says he is going to do.

...a very, very good guy!

BT
If you have a need for these, don't hesitate as I can attest to Wayne being an OUTSTANDING seller who does exactly what he says he is going to do.

...a very, very good guy!

BT
thanks for the kind words BT.

wayne
sold pending payment to fastfrog.

wayne
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top