460 Ford Forum banner

Oil Filter By-Pass ?

1579 Views 7 Replies 5 Participants Last post by  Onlychild
I need one of these for a BBF (429/460) Or something better ?

See less See more
1 - 8 of 8 Posts
I need one of these for a BBF (429/460) Or something better ?

Big Block Ford, FE Ford, Small Block Ford and American made Chrysler engines are all the same size mounting.
Thanks Randy, I've been looking for a remote adapter for my Rail. That broadens the search horizon.
Rob
I used a nice billet piece from Canton on my dragster. I started out with a cast aluminum part like the one above and after several years it split in the threads. The Canton is around $65 mailorder. I used 1/2 npt to -10AN adapters and braided hose going from the adapter to the remote filter mount.

part # 22-595

See less See more
I used a nice billet piece from Canton on my dragster. I started out with a cast aluminum part like the one above and after several years it split in the threads. The Canton is around $65 mailorder. I used 1/2 npt to -10AN adapters and braided hose going from the adapter to the remote filter mount.

part # 22-595

Thanks Dave..............I don't think I could build one for $65, cool.
Rob
I just went to the Canton site and they were $90 plus shipping. Did you find then elsewhere for $60?
Rob
http://www.summitracing.com/parts/CTR-22-595/
$65 retail, but $60 if you get set up with their "Pro Shop"
You can get the Pro-Shop deal if you have an NHRA/IHRA license.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top