[waypastcrazy]

parts updated

1]Brand new still in box l2443nf60 forged dome 460 speedpro pistons and moly rings.made in the usa.$300 plus shipping.

2]D1ve block with paul kanes oiling mods.std bore. Needs machined $100 plus shipping.

3]Also have the stock rods,pistons and crank $50 plus shipping.

If you buy all of the above I will throw in a new set of .010 clevite rod and main bearings.

4]Also have a set of low mileage comp 927 valve springs,titanium retainers and locks.$150.

5]351w performer intake needs a cleaning or blasting $60 plus shipping.

6]292 comp solid roller for bb 460 $200 if you buy cam I will throw in a used set of link bar lifters.sold



8]holley 1050 dominator 8082. 2 circuit. With heat spacer $400 plus shipping sold


I am located in collinsville al 35961. Cell #256-996-3166 thx clyde.
Ps. I am a truck driver and on the road a lot so I can't jump right on getting things shipped but will asap. Thx

 

[1Bad65]

I'd try and mark your items from top to bottom in a column with prices to make things easier for people, not in a paragraph

 

[waypastcrazy]

I'd try and mark your items from top to bottom in a column with prices to make things easier for people, not in a paragraph

I will when I get home. I can't do it from my blackberry phone thx

 

[vjwood]

bellhousing

Do you just want to sell bell ? $$$

 

[waypastcrazy]

Do you just want to sell bell ? $$$

not unless I find a buyer for the convertor I don't want to be sitting on the convertor.as a pair I can still use them if they do not sell.thx clyde

 

[lx545]

more info on the cam please how long used and specs thanks-jj

 

[waypastcrazy]

I bought this cam from nitro lew. He had made about 10 passes on it in his 466. Here's specs.

Brand COMP Cams Manufacturer's Part Number 34-773-9 Part Type Camshafts Product Line COMP Cams Xtreme Energy Camshafts Summit Racing Part Number CCA-34-773-9 Cam Style Mechanical roller tappet Basic Operating RPM Range 3,200-7,200 Intake Duration at 050 inch Lift 254 Exhaust Duration at 050 inch Lift 260 Duration at 050 inch Lift 254 int./260 exh. Advertised Intake Duration 292 Advertised Exhaust Duration 298 Advertised Duration 292 int./298 exh. Intake Valve Lift with Factory Rocker Arm Ratio 0.671 in. Exhaust Valve Lift with Factory Rocker Arm Ratio 0.678 in. Valve Lift with Factory Rocker Arm Ratio 0.671 int./0.678 exh. lift Lobe Separation (degrees) 110 Intake Valve Lash 0.016 in. Exhaust Valve Lash 0.018 in. Computer-Controlled Compatible No Grind Number FF XR292 R-10

 

[lx545]

pm sent

 

[Anton Ólafsson]

1]

6]292 comp solid roller for bb 460 $200 if you buy cam I will throw in a used set of link bar lifters.

Still have the cam?

Do you accept paypal?
Can you send to Iceland?

 

[waypastcrazy]

Sorry guys sale pending on cam. Just have not had time to update thx

 

[waypastcrazy]

Ttt

 

[85redevil]

Any problems with the pa super comp c4? How many passes? Any ideas on how much hp it can handle?

Thanks

Will

 

[wvmudder]

Hey, i'm interested in the dominator, can you give me any info on it? Age, mods, fuel type?

Thanks Dave S.

 

[MoGreen]

I sent you a P.M. I want that Holley HP 1050

Happy trails sir.... I would like to purchase that 1050 Dommy from yah... I know you are travelling the roads a bit... Call me whenever you have a chance 803-485-8256 or cell# 704-968-4299 ask for Mo

 

[waypastcrazy]

Been very busy working. Any interest please call or pm. The 1050 is a 8082-2 gas. It is just as I bought it used no mods. I do not know exact amount of passes on the c4

 

[waypastcrazy]

Bump

 

[waypastcrazy]

ttt

 

[waypastcrazy]

ttt

 

[waypastcrazy]

ttt also have an unknown used set of solid roller lifters 50 bucks plus shipping