460 Ford Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
175 Posts
Discussion Starter #1
I have a set of Pistons and H-beam Rods that came out of a 502 stroker. They have about 20 passes on them. The piston tops are a little dirty and some light scratches on the sides, but other than that they look brand new. The rods look new as well.

The rods are Eagle CRS-6800-S. They already have ARP bolts.
The pistons are SRP flattops with SRP-74 being the only number I see.

I'll post pics when I get back to the shop sometime this week. I'm asking $750 obo plus shipping from North Carolina.

Thanks,
Sean
 

·
Registered
Joined
·
175 Posts
Discussion Starter #2
$700?
 

·
Registered
Joined
·
175 Posts
Discussion Starter #3


 

·
Registered
Joined
·
895 Posts
Pistons

What bore are the pistons ? What valve layout are they standard/new SCJ/P51/A-460 ? Also do they work with a 4.14/4.15" crank or some other ?

Thanks Mark
 

·
Registered
Joined
·
175 Posts
Discussion Starter #6
Bore = 4.390
Standard valve layout. Had a set of Edel RPM's bolted on the motor before I got it.
Compression Distance = 1.420 on a set of 6.8 rods.
Not sure of the crank as I'm still trying to figure out the specifics on the crank. It has virtually no easy to see markings that I have found so far.

Sean
 

·
Registered
Joined
·
175 Posts
Discussion Starter #7
Any other info needed on these?

Sean
 

·
Registered
Joined
·
175 Posts
Discussion Starter #9
$700 & I'll cover shipping in the U.S. I know they are worth that :)
 

·
Registered
Joined
·
175 Posts
Discussion Starter #10
Added more pics of the skirts.





 

·
Registered
Joined
·
175 Posts
Discussion Starter #11
Okay $650 plus shipping is as low as I am going. I'm just going ahead and throwing that out there. If they don't sale for that I'll use them in a future motor.

Thanks,
Sean
 
1 - 11 of 11 Posts
Top