460 Ford Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter #1
8 New JE pistons 4.628 bore, 1.360CH, .225 dome, .990 pin hole, .043-.043-3/16, gas ported, for C460 heads, no pins, $500. 8 New BRC pistons, 4.600 bore, 1.245CH, flattop, .990 pin hole, 1/16-1/16-3/16, for Blue Thunder or CJ style head, no pins, $400. A really nice and complete pair of fully ported C9VE heads by Price Motorsport, 2.25/1.75 stainless valves, set up for 550 lift hyd cam, $900. (2) new 1050 series Wilson Single Stage Pro-Flow Nitrous plates, part #302126. These plates are some really trick looking pieces. They are 1.25" thick with three burst panels on two sides. The plates use Fan Spray tubes that cover 360 degrees of the intake plenum and adjust from 150 to 350HP. I have a package of extra burst panels and a package of jets that goes with them. These units are nearly $400ea from Wilson, $500 plus shipping for everything or $300ea. Go to www.wilsonmanifolds.com if you want to check these units out. I might do some trading if you have something of interest to me, like 427/428 FE goods. I can be contacted by phone at (901)268-6348 or e-mail at [email protected] Thanks Jim
 
1 - 1 of 1 Posts
Top