460 Ford Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
232 Posts
Discussion Starter #1
All,
I am looking for a replacement set of pistons for a newly acquired 501 BBF
Bore is 4.390 stroke is 4.140 need a piston with a 10cc dome to get me around 12 to 1 compression ratio I am looking my (N/A Alcohol mustang).. Also looking to sell the SRP pistons that came with the motor they are 4.390 bore for a 4.14 stroke but are dished -.23cc.. any interested in a low compression piston that would be good for blower or nitrous or hot street motor.. Looking for get $250 shipped... Thanks and let me know..
 

·
Registered
Joined
·
326 Posts
can i get more info on the ones your selling? are they forged? mileage on them? etc I am building a 466 and could use some pistons.

Peace and Love Ron
 

·
Registered
Joined
·
232 Posts
Discussion Starter #3 (Edited)
Piston info

455...
I do not have them acutually in my hands as of yet.. Motor is being shipped to me next weekend.. These were in a street/race car that only made 20 1/8th mile passes and were not street driven ..so mileage is minimal. They are forged.. below is the part number from SRP and info.. They are $590 brand new from SRP. They will come with rings and for and extra $100 they will come with pins.. $350 shipped OR BEST REASONABLE OFFER...
Thanks for interest..
Chris

Part #154166
CID Bore Stroke Rod
501 4.390 4.140 6.700


Head Cubic Centimeters 72cc 80cc 84cc
Compression Ratio 9.9 9.5 8.9
 

·
Registered
Joined
·
5,483 Posts
What kind of head are you using? If it's a factory style chamber (D0VE, D3VE, Edelbrock, TFS, Procomp), I can supply a set of new Diamond pistons with a 10cc dome for $799.00.
 

·
Registered
Joined
·
232 Posts
Discussion Starter #5 (Edited)
Pistons

Edelbrock heads that i just recieved from the mad porter (scott). Believe to be around 90 - 93 cc with 2.25 int and 1.76 exhaust valves.
 
1 - 6 of 6 Posts
Top