460 Ford Forum banner
1 - 5 of 5 Posts

· Registered
19 Posts
Discussion Starter · #1 ·
I am looking for a 0.30 over off the shelf piston to use with a 4.140 crank and 6.8" rods. Piston needs about 25cc dish. I checked SRP and Probe and found only pistons for 6.7" rods. I know they exist since I am currently using 10 year old Probe pistons but need new ones.

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.