460 Ford Forum banner


2579 Views 4 Replies 3 Participants Last post by  rmcomprandy
I am looking for a 0.30 over off the shelf piston to use with a 4.140 crank and 6.8" rods. Piston needs about 25cc dish. I checked SRP and Probe and found only pistons for 6.7" rods. I know they exist since I am currently using 10 year old Probe pistons but need new ones.

1 - 1 of 5 Posts
Totally agree...

DIAMOND is the way to go...
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.